The SF 50 is the official form the government uses to determine your retirement eligibility and to calculate your retirement pension.
Special Event: July 2014
New Webinar Series with Tammy Flanagan and Micah Shilanski, CFP®
If there is a mistake or a typo on an SF-50, it will affect your CSRS or FERS retirement. Or if one of your SF-50s didn’t make it into your OPF (Official Personnel File) or got lost along the way - that time may not be credited towards your retirement.
Your SF 50s are the only form of proof you have that you actually worked during a certain period in time, paystubs or an LES won’t count.
The SF-50 (Standard Form 50) is officially called a “Notification of Personnel Action.”
You should receive an SF50 any time you had an increase in step, grade, pay or a change in jobs. On each SF 50, there is a "FROM" section that will detail your job and pay as it was before the change. Then the "TO" section will show your job and pay details as they are after the change.
You should receive at least one SF-50 a year, typically in January. But you may receive several in a year, if you have other changes in your job.
The box in yellow is Block 4, the Effective Date of this SF-50.
The orange box on the left is the "FROM" section. Details about your job and pay as it was before the change made on this form.
The green box on the right is the "TO" section. This has details about your now current job and pay info from the date of this SF 50, until another SF 50 is issued.
Your SF 50 has important information about your job and pay that affects your federal retirement.
It makes sense to do a quick once over each time you get an SF50 to make sure everything is correct.
Pay extra attention to these blocks:
Blocks 9 & 17: Special Provisions employees should pay extra attention to these codes (read "How a Typo Delayed His Retirement below...)
Blocks 12C & 20C: These are the numbers OPM will use to calculate your
Block 30: Retirement System - make sure this is correct. If you are a FERS and you see FICA or FICA ONLY - that time is not being counted towards your retirement.
Block 31: This is your SCD... but remember, this is NOT the date OPM uses for your pension calculation. Your RSCD is the date that is used, and that does not appear on your SF 50.
To learn more about what each block on the SF 50 contains, check out this excellent webpage by the Dept of Commerce, International Trade Administration, called the SF-50 Demystified.
Throughout your federal career, you’ve received numerous SF-50s.
Some people have kept each form. But I've met lots of federal employees who just threw their SF-50s away because they didn't realize how important they were.
Either way, before you file your retirement paperwork, you’ll want to make sure you have a copy of *every* SF-50. Why?
Let me share a story two stories with you...
One of my clients called me about a co-worker’s situation. We'll call his co-worker Bill (that’s not his real name).
Bill was looking forward to retiring as soon as he was eligible. He picked a retirement date and filed his paperwork a few months in advance. Then he started counting down the days until his federal retirement. But a typo on one of his SF 50s would throw a monkey wrench in his plans.
About a month before his planned retirement date, Bill's HR called. They told him he was not eligible to retire. When HR reviewed his file, they found that one of his SF50s indicated that about 6 months of his time was not creditable for retirement. Bill would need to work an extra 6 months before he would be eligible to retire.
But the problem was... Bill *was* eligible to retire, if it weren't for that typo on his SF50. He even had pay stubs to prove he was paying into the retirement system during those 6 months.
But Bill was told that pay stubs don't count. What counts is what's on your SF50.
My client called to ask if I would help Bill, since he knew that I had helped other federal employees with creditable service issues. I said I would be happy to talk with Bill... but Bill never called.
I found out later that it took Bill quite a while to get things straightened out. Bill ended up delaying his retirement about a month in order to get things resolved.
This is why it’s important to review your SF-50s now, so if you find an issue you have plenty of time to deal with it.
In addition to making sure that your SF-50s are correct, you want to make sure that you have a copy of ALL of your SF-50s. Why?
I had a client retire after 32 years of federal service under CSRS. A few months after she retired, she got a letter from OPM.
In the letter, OPM said that after reviewing her file, they found she only had 28 years of creditable service (instead of 32 years). She was not eligible to retire, her pension checks would stop (they actually hadn't even started yet) and she was required to go back to work.
She called me as soon as she got the letter. Fortunately, she had a copy of every SF-50 she had ever received.
We got on the phone with OPM and found out that they were missing 4 years of SF-50s. (it turns out those years were where she had changed agencies) We were able to send OPM a copy of her SF 50s, she got proper credit, and was able to stay retired.
What do you think would have happened if she didn’t have a copy of those SF-50s?
If you know that you don’t have all your SF-50s, it’s important to start tracking them down now.
First, request a copy of your OPF from your HR department, that should have all or most of your SF-50s. And as long as your getting a copy, make sure you get a copy of EVERYTHING in your OPF.
Once you have a stack of your SF 50s, but them in chronological order, by Block 4, the Effective date. I recommend starting with your first/earliest SF-50s at the top of the pile, with your most recent SF-50s at the back of the pile.
Then review them for the Three C’s...
Once your stack of SF50s are ordered by date, look at each form for the three C’s...
*Correct - does every thing look correct? Any typos?
*Creditable - is the service described creditable... does it count towards retirement?
*Continuous - do you have any breaks in service, or gaps in your SF-50s?
The SF-50 is a unique form. It does not have a ‘from’ and ‘to’ date on each form. Each form only has an ‘effective date’.
On the form, the SF-50 will show your ‘old’ job information in the “FROM” section. Then the form declares that ‘as of this date’ (the effective date) - here is what is now current by listing out your new information in the “TO” section.
How do you tell if you have continuous forms? Look at the information in the “TO” section of the form you’re evaluating. You’re going to compare this block of items to the “FROM” section of your next chronological SF-50.
All of the information, right down to the dollar amount of your pay needs to match on the “TO” section of one SF-50 to the “FROM” section of the next.
If they do match up, you can be 99% sure that you have consecutive SF-50s. If they do not match up - there is a problem.
Ideally, you’ll review each SF-50 when you get it. It’s so much easier to catch any typos or errors when the information applies to your current situation.
Although, if you've never reviewed your SF-50s, now is a better time than never.
While this review may be tedious - it is very important.
Believe me, it’s worth it to spend twice as much time doing this process correctly than half as much time and missing something. :)
And if you do find you’re missing a form, or there is a typo, you want to give yourself as much time as possible to get it corrected - before it effects your retirement.
I’ve helped many clients get situations resolved with their HR departments.
Many times clients come back and tell me that their HR said “no” to something. But when I contact their HR directly and explain the situation, we get quite a bit cleared up.
At most agencies, HR is overworked and understaffed, and there are an unbelievable number of things they’re responsible for. Once we can bring the right information to light, we all see the situation clearly.
Remember to be polite, but it's your retirement. If you've worked the time, you deserve to have it count towards your retirement.
✔ How to Maximize Your FERS Benefits
✔ Understand Your Retirement Income
✔ Custom FERS Retirement Calculators
✔ Learn One Step at a Time
✔ Instant Access – Available 24/7
FERS-Route-to-Retirement is the
most comprehensive Pre-Retirement
& Financial Planning class for Federal
Employees available online
- or your money back
Are you ready to start
planning your FERS Retirement?
Shilanski is a CERTIFIED FINANCIAL PLANNER™
professional who specializes in helping federal employees
get the most out of their retirement benefits. Micah is a fee-based
financial planner and works with
a select group of clients. Micah works
with each client to tailor a plan that is customized to their dreams, goals,
and financial situation. Each client is unique, and so is their
Plan Your Federal Retirement is not employed by the federal government and does not represent the federal government.
Plan Your Federal Retirement is a dba of Shilanski & Associates, Inc.
Shilanski & Associates, Inc. is an independent financial planning
firm headquartered in Anchorage, Alaska, that has been in business for nearly
Shilanski & Associates, Inc., is an Alaska Registered Investment Advisor, with securities offered through Summit Brokerage Services, Inc., Member FINRA/SIPC. Shilanski & Associates, Inc. is not affiliated with Summit Brokerage Services, Inc.
All information herein is solely for informational purposes. This is not an offer to buy or sell securities. The presence of this web site on the Internet shall in no direct or indirect fashion raise any inference or implication that Shilanski and Associates, Inc., an Alaska Registered Investment Adviser, is selling, offering to sell or soliciting to provide investment advisory services to residents of any state other than the state of Alaska.
Copyright 2009-2014 Plan-Your-Federal-Retirement.com All Rights Reserved.